I'm thinking of building a PC - any advice?
My laptop is running out of storage space and I don't have anything I can remove anymore to increase it by much, so I'm thinking about building a pc. I'd also like to find a better gpu for doing video editing.
It will be the first one I've built, so I don't really know what I need. Also, does it matter for compatibility for Linux whether I go with AMD or Intel?
The high end of what I want to use it for is video editing with Kdenlive or Davinci Resolve, some modeling and animation in Blender, and some light gaming, like Minecraft or TUNIC.
I figure one of these guides might be useful, but I don't really know which.
Is there anything else I should know for setting up a PC to run Linux?
Edit: Maybe these guides from Logical Increments can help actually.
like this
reshared this
Hovrättsdom om mord i Huddinge. Svea hovrätt har idag meddelat dom i ett mål om mord i Huddinge. Mordet har utgjort en del i en våldsam konflikt mellan två olika kriminella grupperingar med rötter i Södertälje.
China Is Rapidly Becoming a Leading Innovator in Advanced Industries
China Is Rapidly Becoming a Leading Innovator in Advanced Industries
There may be no more important question for the West’s competitive position in advanced industries than whether China is becoming a rival innovator.Robert D. Atkinson (Information Technology and Innovation Foundation | ITIF)
like this
- Cool story. I liked it, and the visual of the skullbone with an arrowhead in it was welcome, as well as sufficiently out of context not to feel gruesome.
- I think the headline of "Europe's Oldest Battlefield" is more likely to be accurate than the article's "world’s oldest battlefield," but there may be some nuance of meaning (oldest with war dead actually found in situ?) I'm missing. Neat thing to learn about either way.
- The iamverysmart contingent that refuses to read the entire articles is out in full force in the Gizmodo comments, with several people suggesting that the foreign arrow heads were from trade ("The foreign arrowheads have not been found in tombs in the Tollense area, indicating that the arrowheads from elsewhere didn’t simply make their way to the region through trade."), and several others musing on what the metal arrowheads might have been made of ("The arrowheads were flint and bronze.").
As the team noted in their paper, no helmets and breastplates typical of the time have shown up from archaeological excavations of the site, so more digs may be necessary to reveal more about the ancient combatants at Tollense, the remains of many of whom remain on the site.
Probably picked clean after the battle. I would think scavengers knew that this was a location that yielded scrap metal following the battle.
I... had not. The permissive hold option looks like it might address my second issue, that of the fact that the fixed timing is incongruent with my far less consistent human timing.
Someone else mentioned the timeless homerow mods, wherein positional hold-tap is used to address rolling issues, which is what I think I'm seeing with the shift-down/char-down/shift-up/char-up sequence not outputting the expected shifted character.
Thanks for pointing me back at the documentation. TBH, I'm a bit overwhelmed by the number of configurable options in QMK, and suffer information overload: pointers like that help me figure out where to start fiddling. Working with QMK, even through the incredibly convenient Vial application, makes me feel like sitting in front of a Moog synthesizer.
Open Source AI Definition – Weekly update September 23
like this
reshared this
My first instinct is to say "No shit Sherlock", of course people who get paid more for their projects can afford to contribute more time to them...
but I do understand that having empirical documented evidence of something, even of it should be common sense, is really important, cause common sense isn't as common as people think it is (especially when a lot of people in power seem to quite intentionally lack it)
like this
Official Plasma 6 Breeze UI Refresh Mockups
cross-posted from: lemmy.world/post/20092494
GujjuGang7 on Reddit found this, saying:
Found this link while looking through the upcoming theming engine (Union) repository. It has mockups for several core apps (dolphin, Kate, konsole and more) and general components such as modals and titlebars.KDE contributor Manueljlin would like to remind you:
hey folks, it's really early still. we didn't even properly show it at Akademy. there's no design system to properly back it up yet - only some tokens and components that are definitely subject to change. please keep that in mind
like this
It’s so sad to hear that KDE died of figma.
(For real though I’m looking forward to seeing how this turns out, love Plasma a lot so hoping for the best from it)
CZ: forest care, natural history
Ohrožuje je sucho a kůrovec, mizí nám před očima, jsou v krizi – říká se o lesích. Jenže v krizi je možná spíše náš pohled na lesy v podobě, jakou jsme sami vytvořili. Tématu se věnujeme v aktuálním čísle časopisu A / Věda a výzkum. Většinou holá, vypleněná půda. Zůstalo jen pár stromů na těžko...
Switch to Linux: any suggestion on a virtual screen manager like DisplayFusion?
I want to switch from Windows to Linux for my office PC.
I will be using multiple Windows VM because in the office we use multiple software that runs only on Windows (maybe we'll switch to something else, but right now I need the VMs) and because i like to snapshots and go back in time when I test new software.
I thought about Ubuntu because it seems to be the most user friendly.
I always work with a tons of opened windows (mainly Firefox) and I like to have a place for each of them, Right now on Windows I use DisplayFusion that creates multiple virtual screens (7, 4 or the 32" horizontal monitor and 3 on the 28" vertical one, both 4K), I've attached the configuration.
So, the question: is there a software that works kinda like DisplayFusion? (virtual screen each with it's own taskbar, maximize in each of them, remember the position of each window, ...).
P.s. Can I pass only some USB port to a Windows VM using KVM?
Pp.s. Is it possible to use Premiere on a Windows VM? Would it run smooth?
like this
VFIO GPU Passthrough for Premiere is a must. While not trivial to set up, it’s not too bad if you know what to do. It took me some trial and error but didn’t spend too much time on it. Main issue is making sure your PC has enough PCIe lanes.
ETA: look into LookingGlass for capturing the framebuffer from a GPU accelerated VM into your Linux host. I haven’t tried getting this to work personally but I have used Moonlight which adapts Nvidia game streaming tech for your desktop apps.
Rappare och youtuber i konflikt. En så kallad youtuber eller influerare som i detta fall är en slags veckotidningsskribent men i filmform och en svensk gängkriminell som också är rappare har råkat i luven på varandra.
Breakthrough Study from IU Scientists Predicts Catastrophic River Shifts that Threaten Millions Worldwide
Breakthrough study from IU scientists predicts catastrophic river shifts that threaten millions worldwide
Indiana University researchers have uncovered key insights into the dangerous phenomenon of “river avulsion,” offering a way to predict when and where...news.iu.edu
like this
BBC: How restoring rivers' natural curves can prevent flooding (Frankie Adkins)
For centuries meandering rivers have been straightened – but experts say restoring their natural bends and curves can prevent flooding and create healthy habitats for wildlife.
For centuries meandering rivers have been straightened – but experts say restoring their natural bends and curves can prevent flooding and create healthy habitats for wildlife.
Dirk likes this.
Man ihjälskjuten i Uddevalla. Omkring klockan 20 i elva på lördagskvällen inkom larm om en skjutning vid Dalabergsskolan på Dalaberg (Dalabergs centrum), Uddevalla. När ambulans kom till platsen hittade de en skadad man i 30-årsåldern.
What is the advantage of IRC over say Matrix, Email, etc...
like this
Email is message exchange with a person or group of people. They can reply at any time.
IRC is a chatroom. You go to it when you want to chat. A lot of software have support channels. You probably don't know most of these people. Unless you are saving them somehow, you don't have a history of the chat room.
I've never used Matrix but it's a instant messaging protocol that allows voice and video.
Study shows reduced inflammation in residents after adding trees to their neighborhoods
Study shows reduced inflammation in residents after adding trees to their neighborhoods
A new project has found that people living in neighborhoods where the number of trees and shrubs was more than doubled showed lower levels of a blood marker of inflammation than those living outside the planted areas.ScienceDaily
like this
☂️-
in reply to Interstellar_1 • • •sparky1337
in reply to ☂️- • • •Just don’t bother with a 13th/14th gen intel right now. Either go 12th gen intel, or straight up AMD which is what I’d recommend.
Source
like this
rem26_art likes this.
Interstellar_1
in reply to sparky1337 • • •gravitas_deficiency
in reply to ☂️- • • •Uh… are you not aware of the catastrophically bad lithography issues Intel has had lately across both the 13th and 14th gen, and the subsequent ass-tier fashion in which they handled it?
Do not buy a 13th or 14th gen Intel CPU.
like this
imecth likes this.
☂️-
in reply to gravitas_deficiency • • •gravitas_deficiency
in reply to ☂️- • • •☂️-
in reply to gravitas_deficiency • • •AmbiguousProps
in reply to Interstellar_1 • • •Whatever you do, do not get an Nvidia GPU. I've only ever had problems with Nvidia drivers on Linux. Meanwhile, the AMD drivers (both the ones baked into the kernel and proprietary) work nearly flawlessly.
Intel's most recent generation of CPUs were also frying themselves and Intel (at least last I checked) were not accepting RMAs from affected customers. Something to consider for your CPU at least.
jlow (he/him)
in reply to AmbiguousProps • • •AmbiguousProps
in reply to jlow (he/him) • • •RogueBanana
in reply to AmbiguousProps • • •jlow (he/him)
in reply to AmbiguousProps • • •Telorand
in reply to jlow (he/him) • • •jlow (he/him)
in reply to Telorand • • •Telorand
in reply to jlow (he/him) • • •jlow (he/him)
in reply to Telorand • • •Snot Flickerman
in reply to Interstellar_1 • • •pcpartpicker.com is a good place to start and can help you know if specific parts are compatible but it's just a place to start and is often still missing important info.
So you still need to do due diligence and do things like check measurements to make sure, for example, your video card will actually fit inside your case, etc.
Also, since its your first time, you want to avoid any motherboards that require you to do a BIOS update to handle a newer processor, because that's just complicated stuff that you're going to want to skip as a beginner.
It's more expensive but go for a newer motherboard that is compatible with your processor out-of-the-box. BIOS updates are a pain and scary even for advanced users.
like this
rem26_art likes this.
The Hobbyist
in reply to Interstellar_1 • • •Snot Flickerman
in reply to The Hobbyist • • •Interstellar_1
in reply to The Hobbyist • • •jlow (he/him)
in reply to Interstellar_1 • • •jlow (he/him)
in reply to jlow (he/him) • • •HumanPenguin
in reply to jlow (he/him) • • •High use Blender users tend to avoid AMD for the reasons you point out.
This leads to less updates due to amd users not being to interested in the community.
It is an issuw without any practicle solution. Because as I need a long overdue update. Again nvidia seems the only real choice.
Everyone is sorta forced to do that unless we can convince amd users to just try out blender and submit results.
So hi any AMD users who dont care about blender.
Give it a try and submit performance data please.
rem26_art
in reply to Interstellar_1 • • •I'd avoid a 13th or 14th gen Intel processor right now because they've had a lot of problems with their manufacturing process. Otherwise, there's not really much difference between AMD and Intel in terms of like, OS compatibility or anything.
I've done some basic work with Davinci Resolve on linux and I haven't really had any issues with my Radeon 7800XT. I can't really speak for using the proprietary drivers for AMD, but with the open source drivers, as long as you install rocm-opencl through your package manager, Davinci Resolve should be fine. Overall, I'd recommend an AMD GPU.
Edit: You mentioned blender in a comment. For AMD's open source drivers you'd need to install rocm-hip for Cycles to work
Edit 2: I hadn't tried blender in a bit and I realized apparently at least on Fedora 40, you also need rocm-hip-devel at least as of 09/24/24 for supported AMD GPUs to show up in Blender. Idk how that would translate to other distros
PC Part Picker is good cuz when you start a new build, you start with the CPU and then it'll only show you parts compatible with tha
... show moreI'd avoid a 13th or 14th gen Intel processor right now because they've had a lot of problems with their manufacturing process. Otherwise, there's not really much difference between AMD and Intel in terms of like, OS compatibility or anything.
I've done some basic work with Davinci Resolve on linux and I haven't really had any issues with my Radeon 7800XT. I can't really speak for using the proprietary drivers for AMD, but with the open source drivers, as long as you install rocm-opencl through your package manager, Davinci Resolve should be fine. Overall, I'd recommend an AMD GPU.
Edit: You mentioned blender in a comment. For AMD's open source drivers you'd need to install rocm-hip for Cycles to work
Edit 2: I hadn't tried blender in a bit and I realized apparently at least on Fedora 40, you also need rocm-hip-devel at least as of 09/24/24 for supported AMD GPUs to show up in Blender. Idk how that would translate to other distros
PC Part Picker is good cuz when you start a new build, you start with the CPU and then it'll only show you parts compatible with that CPU. As someone else mentioned tho, its not perfect and you still may want to check clearances between parts, like that your CPU cooler isnt too tall for your case, or that your Power Supply isnt too long (been there, lmao)
From my own personal experience with buying brand new RAM and it being bad a few times, I'd probably run memtest86+ for a few hours once the computer is together to make sure that the RAM actually works. You can download the linux ISO w/ GRUB option and make a bootable flash drive out of that and let it run. Afterwards, I usually install my OS. Might save you a few headaches down the road if you get into your new OS and things behave strangely, but its up to you.
Other than that, the setup shouldn't be too hard.
jlow (he/him)
in reply to rem26_art • • •rem26_art
in reply to jlow (he/him) • • •jlow (he/him)
in reply to rem26_art • • •erwan
in reply to Interstellar_1 • • •gomp
in reply to Interstellar_1 • • •ebay, ebay, ebay (and also pcpartpicker).
Unless you want to frag people at 4k@140Hz in the latest AAA game, you probably don't need the latest generation components (and I'd say your requirement are quite low here, consider how the only thing you complain about is storage space).
Unless you really want to assemble everything by yourself, consider buying one of the second-hand, previous-gen gaming rigs on ebay (but watch out for scams!). Even if you do want to assemble the PC yourself, consider buying used parts on ebay (or buying a full PC to cannibalize reselling the excess).
What are the specs of your current rig?
Except for storage, are you satisfied with how it runs?
How much storage do you need for the projects you are working on? How much to archive things?
Do you want to do anything about backups?
Is a full size tower ok?
How good a video do you want?
What is your budget?
Diplomjodler
in reply to Interstellar_1 • • •Here's a video with some good builds at different price points. That should be a decent starting point.
youtu.be/8tUM-miOzBA?si=BNjOJe…
Julian
in reply to Interstellar_1 • • •Some build advice:
- Be safe - don't wear socks, stand on a hard floor if possible, ground yourself if you have a wrist strap for that, and discharge any static by touching metal and/or the case before touching any components. And no matter what, DO NOT open the power supply, and definitely don't touch anything in it!
- The huge motherboard connector probably requires more force than comfortable.
- Watch through at least one build guide before starting. That way you know the process.
Hope that helps, and don't let it scare you away - it's really fun to do and if you're careful, chances are nothing major will go wrong.
mypasswordis1234
in reply to Julian • • •spittingimage
in reply to Interstellar_1 • • •I built my current PC using one of those PCPartPicker guides, and I'm very happy with it.
The only issue I had was the video driver. I use the Linux Mint Long Term Support version, and the kernel didn't have a recent enough driver for my card. I just needed to switch to the latest kernel and it was good to go. I actually had no idea how to troubleshoot it, and went to the LM forum to ask for help. I was reading through the guide on what info to supply with help requests and realised that the example fault and solution were the exact ones I was facing!
bizarroland
in reply to Interstellar_1 • • •I've noticed that when I am specking out a new computer I typically fall into the trap of wanting the absolute best computer I can get for the money.
I've always been on the cheaper side, so I have found myself spending days or weeks researching various parts at various quality levels at various prices.
It becomes a huge drag.
Set the budget that you're comfortable with, find the motherboard that has the features that you want, then get a CPU that fits in that price range, a case that fits your use cases, and then if you're going to splurge on anything splurge on the power supply as a good power supply can last you through multiple computers.
If you have to save money somewhere, save money on RAM as you can always order more or upgrade the rim that you have relatively inexpensively. Maybe if you're going intel, purchase an i5 CPU and then consider upgrading if you max out its abilities or you find yourself frequently running at 100% utilization.
And don't overlook pre-builts. There are lots of refurbished computers that you can purchase for far less t
... show moreI've noticed that when I am specking out a new computer I typically fall into the trap of wanting the absolute best computer I can get for the money.
I've always been on the cheaper side, so I have found myself spending days or weeks researching various parts at various quality levels at various prices.
It becomes a huge drag.
Set the budget that you're comfortable with, find the motherboard that has the features that you want, then get a CPU that fits in that price range, a case that fits your use cases, and then if you're going to splurge on anything splurge on the power supply as a good power supply can last you through multiple computers.
If you have to save money somewhere, save money on RAM as you can always order more or upgrade the rim that you have relatively inexpensively. Maybe if you're going intel, purchase an i5 CPU and then consider upgrading if you max out its abilities or you find yourself frequently running at 100% utilization.
And don't overlook pre-builts. There are lots of refurbished computers that you can purchase for far less than the cost of the individual parts that have all of the minimum specs that you want in exchange for little things like only having a single stick of ram or having a low quality SSD.
There's nothing that stops you from upgrading later should your use case change.
Interstellar_1
in reply to bizarroland • • •like this
bizarroland likes this.
Telorand
in reply to Interstellar_1 • • •Zorsith
in reply to Telorand • • •Zorsith
in reply to bizarroland • • •like this
bizarroland likes this.
bestboyfriendintheworld
in reply to Interstellar_1 • • •sparky1337
Unknown parent • • •tabular
in reply to Interstellar_1 • • •I've used Logical Increments in the past and found it very useful to meet a budget. Now I aim for "price to performance" sweet spots (since GPU prices have been crazy I'm now well overdue for a new GPU).
Both CPU manufactures are changing their naming schemes (to make it difficult to know what it is, I wish this was hyperbole). GPU manufactures also make some weird choice on naming GPUs (same-name GPU with different VRAM). Reading/watching reviews of specific parts will likely be the best way to know what you aught to buy.
If you're confident in your technical knowledge or want to then narrow down your choices then I would recommend watching videos from:
- (GPU, CPU, Case)
- (GPU, CPU, Case, Monitor) Hardware Unboxed and .
For a casual overview of CPUs/GPUs video review I'd recommend something like Linus Tech Tips (even with the prior controversy).
krolden
in reply to Interstellar_1 • • •LeFantome
in reply to Interstellar_1 • • •Nibodhika
in reply to Interstellar_1 • • •GPU go with AMD, I don't think I need to give much explanations here.
CPU you can do either, BUT AMD is usually better for multi-threaded applications (like video editing, modeling or animation), also an AM5 slot should last you years to come, AMD stayed with AM4 for a long time (I had most of the same PC for almost a decade thanks to that, it's still the same AM4, but I had to replace the MOBO since the old one broke). So I would also choose AMD here, although Intel is not bad either, and if you get it in a sale it might come out cheaper.
data1701d (He/Him)
in reply to Interstellar_1 • • •My first question is about your laptop; is the SSD removable, because if so, even a pretty large SSD is cheap these days.
Also, the GPU question is complicated. For most use cases, AMD is better on Linux. However, since you’re doing Resolve and Blender, that gets a bit murky. It depends on if ROCm support is less dismal on later AMD cards - I have an RX 580, which AMD quickly dropped support for and I am bitter about.
This is not to say I like NVidia, but for fast video encoding and rendering, as far as I know, it’s the easier option. Someone correct me if I am wrong, please.
As for actually building the thing, you’d start by look for what CPU you want, then find a compatible motherboard, then read the board’s compatibility list for RAM. They usually have compatibility lists for storage - those don’t matter, as it’s pretty universal. Then choose a graphics card, a case with the right form factor, a PSU, and a cooler. I tend to go with liquid cooling, as it’s not that expensive anymore.
Like others have said, check k
... show moreMy first question is about your laptop; is the SSD removable, because if so, even a pretty large SSD is cheap these days.
Also, the GPU question is complicated. For most use cases, AMD is better on Linux. However, since you’re doing Resolve and Blender, that gets a bit murky. It depends on if ROCm support is less dismal on later AMD cards - I have an RX 580, which AMD quickly dropped support for and I am bitter about.
This is not to say I like NVidia, but for fast video encoding and rendering, as far as I know, it’s the easier option. Someone correct me if I am wrong, please.
As for actually building the thing, you’d start by look for what CPU you want, then find a compatible motherboard, then read the board’s compatibility list for RAM. They usually have compatibility lists for storage - those don’t matter, as it’s pretty universal. Then choose a graphics card, a case with the right form factor, a PSU, and a cooler. I tend to go with liquid cooling, as it’s not that expensive anymore.
Like others have said, check kernel support for your hardware, but also, it’s generally much easier on desktop. The main things to look out for are ethernet and WiFi controllers. By the way, what distro do you prefer, because that’s definitely a factor.
Interstellar_1
in reply to data1701d (He/Him) • • •kinship
in reply to Interstellar_1 • • •MinFapper
in reply to kinship • • •Onihikage
in reply to MinFapper • • •data1701d (He/Him)
Unknown parent • • •Interstellar_1
Unknown parent • • •bloodfart
in reply to Interstellar_1 • • •you are getting advice that will make a good gaming pc but not a good workstation for what you said you're gonna do.
do the opposite of what most everyone in this thread is saying:
intel over amd (this could actually go either way depending on the price point), nvidia over amd, start at 32gb of ram and go up from there. prioritize cores over threads, sneak a rotational hard disk in, spend more on your power supply than you planned to.
plan on not using wayland.
Interstellar_1
in reply to bloodfart • • •Possibly linux
in reply to Interstellar_1 • • •bloodfart
in reply to Interstellar_1 • • •You mainly want to be able to do 3d and video editing right?
Those two, specifically with davinci resolve and blender, work best with nvenc and libcuda(?), the software libraries that let you take advantage of your nvidia cards encoders and cuda cores.
So if you were building for that workload, you’d have an nvidia card and many problems people encounter in Wayland come from using it with an nvidia card.
So yeah it’s the nvidia support. Most people will say “fuck nvidia, just don’t buy their hardware” but it’s the best choice for you and would be a huge help, so choosing between Wayland and nvidia is a no brainer.
It is a bummer that you’ll need to install x specially, but I’d be really surprised if there isn’t decent support for that.
There’s always the hope that Wayland will get better over time and you’ll be able to use it in a few years.
E: a word on encoding: both amd and intel CPU’s have video encode and decode support, but the intel qsv is more widely supported and te
... show moreYou mainly want to be able to do 3d and video editing right?
Those two, specifically with davinci resolve and blender, work best with nvenc and libcuda(?), the software libraries that let you take advantage of your nvidia cards encoders and cuda cores.
So if you were building for that workload, you’d have an nvidia card and many problems people encounter in Wayland come from using it with an nvidia card.
So yeah it’s the nvidia support. Most people will say “fuck nvidia, just don’t buy their hardware” but it’s the best choice for you and would be a huge help, so choosing between Wayland and nvidia is a no brainer.
It is a bummer that you’ll need to install x specially, but I’d be really surprised if there isn’t decent support for that.
There’s always the hope that Wayland will get better over time and you’ll be able to use it in a few years.
E: a word on encoding: both amd and intel CPU’s have video encode and decode support, but the intel qsv is more widely supported and tends to be faster most of the time. When people suggest intels arc gpus they’re saying it because those gpus use qsv and for a video editing workstation they’d be a good choice.
Part of the reason I put intel and amd cpus on an even footing for you is because any cost savings you get from going amd would likely be offset by the performance decrease. Theres some good breakdowns of cpu encoder performance out there if you want to really dive in, it remember that you’re also in a good place to buy intel because of the crazy deals from sky is falling people.
That kinda ties into the cores over threads thing too. If your computers workload is a bunch of little stuff then you can really make hay of using a scheduler that is always switching stuff around. One of the things that makes amds 3d processors so good at that stuff is that they have a very big cache so they’re able to extend the benefit of multi threading schedulers up to larger processes. You’re looking at sending your computer a big ol’ chunk of work though, so you’re not usually gonna be multithreading with that powerful scheduler and instead just letting cores crunch away.
Part of the reason I didn’t suggest intels arc stuff is that you’re also doing 3d work and being able to take advantage of the very mature cuda toolchain is more important.
Plus nvidia encoding is also great and if you were to pair it with an intel cpu you could have the best of both worlds.
You’re really looking to build something different than most people and that’s why my advice was so against the grain. Hope you end up with a badass workstation.
Possibly linux
in reply to bloodfart • • •Interstellar_1
in reply to Possibly linux • • •Possibly linux
in reply to Interstellar_1 • • •bloodfart
in reply to Possibly linux • • •Eugenia
in reply to Interstellar_1 • • •For DaVinci Resolve, you will need an nvidia gpu, even their amd support is half-ar3ed, and intel doesn't work at all (they don't support it under linux, while they do on windows). So you need to decide if you're going to use resolve, or kdenlive (that works with everything, since it's not really accelerated -- it's slower (their acceleration is buggy)). However, if you're going with nvidia, you will probably experience problems on the everyday desktop. So I'd suggest an amd gpu and cpu possibly.
Alternatively, just get a refurbished Dell laptop, or an older Zenbook. These usually work great with Linux.
Interstellar_1
in reply to Eugenia • • •RogueBanana
Unknown parent • • •bloodfart
Unknown parent • • •I am not going to fight you on if x is better than Wayland.
The ops use case involves operations, software and hardware that function best with x.
The op should avoid Wayland.
StanislavP
in reply to Interstellar_1 • • •accideath
in reply to StanislavP • • •thegreenguy
in reply to bloodfart • • •bloodfart
in reply to thegreenguy • • •The op asked for help to make their experience as painless as possible and listed two primary use cases that not only are often related to the problems people encounter with Wayland but function best with hardware that is also related to the problems people encounter with Wayland.
If someone said they need to haul hay I wouldn’t say “try it in your Saturn first and see if it works!” I’d say “make sure you have a truck or a trailer.”
The harm is in setting a person up for failure when they asked for help.
thegreenguy
in reply to bloodfart • • •data1701d (He/Him)
Unknown parent • • •ROCm is basically AMD’s GPU compute system, like CUDA but worse but better because the card is actually usable for desktop stuff.
However, they only support it on specific distros, and they’re really weird about what cards they support. This should be changing soon - Debian’s been working on packaging it natively, and I think so has Fedora.
Chewy
in reply to Interstellar_1 • • •Blender and DaVinci Resolve work better on Nvidia. AMD might work, but it will be a hassle and you'll likely need the proprietary AMD drivers anyway.
With Nvidia supporting Wayland and the open-source NVK continuing to get better, you could even switch to open source drivers for gaming at some point, if you prefer.
Edit: I've had enough issues with AMD GPU's clocking down while gaming, leading to micro stuttering. So don't buy AMD just because everyone tells you they work flawlessly.
For CPU and mainboard, everything works well — just don't buy a random unknown SSD from Amazon, then you're asking for data loss and random issues.
Possibly linux
in reply to Interstellar_1 • • •Get a old workstation class machine
It is way more fun
Possibly linux
in reply to bloodfart • • •Possibly linux
in reply to bloodfart • • •CocoLopez
in reply to Interstellar_1 • • •Not sure if this would help, but I found this channel helpful for understanding the basics and mostly avoiding wrong parts. Also he has some videos were he explains why you should choose one part over another.
Scatter volt channel
banghida
Unknown parent • • •banghida
Unknown parent • • •