I needed a new laptop to get rid of my old one that was not portable. I made 3 posts already about this journey: 1, 2, 3 – so I will try not to repeat myself.
I needed a new laptop to get rid of my old one that was not portable. I made 3 posts already about this journey: 1, 2, 3 – so I will try not to repeat myself.
My mission: get a sturdy and powerful laptop that can last me for a decade. Upgradable and fixable in a reasonable manner. Big screen, yet portable. Do it!
After months of searching and thanks to Roma and Guil primarily, who donated 98% of the money for the laptop, I settled for the Dell Inspiron 7620 2-in-1 16 inches. It has a core i7-1260p – 12 cores 16 threads. An Nvidia MX550, 64GB of RAM and 4TB NVME. 4k screen, 16:10 aspect ratio.
I will tell you why I chose this one.
First let me tell you the negative parts of this laptop, since none can be perfect for me I guess. Then I’ll tell you why overall it is a great laptop for me.
What I don’t quite like.
The keyboard. You see I write a lot and I want a great keyboard. This one is too shallow. I miss the depth of the previous keyboard….but I guess I’ll get used to it eventually. The keyboard is also in German….since I bought the laptop from germany, ebay, second hand but unused. Basically brand new.
The Y and Z are switched but I chose a QWERTY layout in TROMjaro so despite showing differently, the letters are in a QWERTY format. I will try to also manually switch them but I am affraid not to break them.
I also kinda don’t like the arrow keys…
The up and down arrows are too tiny. This is a bad design on any keyboard.
To add salt to the injury… this layer:
It is a layer of some sort of plastic/glass on top of the metal chassis, that is great for the touchpad but the edges are a bit sharp so when I type my arms get cut a bit in these edges….that happens when I sit on my desk. Like 99% of the time….
SO the typing experience is not that great. Not awful, and I will get used to it, but yeah….that’s the biggest downside so far.
Another slight discomfort: opening the laptop to upgrade was a scary experience. You have a few screws but once you start unscrewing them the top part of the bottom case starts to violently try to get out, and things are bendy and make noises. Maybe the captive screws on that side should not be fully unscrewed but loosen and then try to open the case little by little.
Like all laptops (almost) the bottom detachable case has plastic bits inside that clip into the laptop, and these are always sketchy…so I even broke 2 while opening it. Was not a great experience but I guess next time it will be easy. Luckily the entire laptop is made out of aluminium so even without these plastic things everything can close pretty tight.
It can be loud and it is a bit heavy. Having a dedicated GPU the fans will be pretty loud when you do intensive tasks, but probably that’s quite normal… Also it is heavy for a “tablet” and quite huge. So this is not really comfortable to use it like that. On the desk is properly fine.
Software-related issues.
Since this laptop is quite new, not even a year old, the hardware is not flawless with Linux. The worst of them all: the speakers will stop working after a few minutes of use. You have to restart pulseaudio for them to work again for a bit. Then they stop again. This seems to be a bug that was reported and should be fixed with newer releases of the kernel. I can easily put up with that since I never use the laptop’s speakers – I have external ones – but for most people this would be a reason not to use Linux on this laptop.
The Hibernate mode kills your laptop. I found out the hard way. I had to fix some bad sectors on the drive because it was not booting up anymore. Probably another issue that will be fixed in the near future, but for now no Hibernate mode. Suspend works ok tho.
If I turn the screen brightness down completely, from the keyboard, I cannot bring it up again. I have to shut down the laptop from the power button….that sucks.
The face recognition camera does not have any real support in Linux so that’s not usable….this is the case for all laptops as far as I know.
Closing the lid won’t respect the XFCE settings I setup for it, so it won’t turn off the screen, or lock, or else.
Basically, with Linux, this laptop is not easily portable. You can’t use the speakers, you can’t hibernate it, you can’t even close the lid to have it turn off the screen….
So, you may wonder, why did I keep this laptop if it has these issues?
First of all the software related issues will be fixed and they won’t bother me much at all. Pretty much every laptop I had to install Linux on, had some sort of issues like that. It is normal when you create an operating system for ALL laptops out there.
Second, the hardware-related issues are not that bad. I am getting used to the keyboard and I won’t have to open up the laptop that often anyway.
So, then, the good parts.
The build quality is great. This is all metal. Slimbook for example felt flimsy, this one feels really sturdy. I can kill a human and a dog with this laptop and I am sure it will still work 😀. The hinges, metal, feel like they will last me a lifetime. It barely bends, no cracks, and feels really solid overall…
It is also super slim and of course bendable 360 degrees:
Look how great that looks. So thin, so portable. This is a lot more slim-book than the Slimbook one 😀. And the charger is also tiny compared to the Slimbook or my previous laptop:
The touchscreen is also a plus since I can test TROMjaro directly on my own machine.
Speaking of the screen, the screen is AMAZING. The blacks are so black that if I were to select a 16:9 instead of 16:10 resolution I can’t even tell since the black borders are as black as the screen’s chassis. The colors are vibrant and it looks amazing from all angles.
Also…am I crazy or 3-4k resolution is no different from Full HD!? I tested with this laptop and there is 0 difference in how it looks. That’s good since I can use the FullHD resolution and this improves the battery life. From my initial tests it can last some 5-6 hours on wifi doing things. Others have tested this and it can last some 20h if you are not connected to the internet and just watch local media.
When the speakers work they are very loud and sound great, despite only using 2 of them out of 4 in Linux…..when they will all work this laptop will sound amazing am sure.
The touchpad is great. Smooth, HUGE, and looks neat.
The glassy surface that cuts my arms while typing feels great when using the touchpad 😁
Speaking of looking neat, there is only 1 logo on the back.
And that’s not even that visible. I like that.
The port selection is perfect. On the left side you get an HDMI, normal USB, and two USB C / Thunderbolt – meaning they support any sort of connection basically.
On the right side you get another normal USB port, an audio jack, and a full SD size card reader.
So you can be sure that this laptop can connect to anything.
For example the way I set it up now that I have to work on TROM II and need a bunch of external stuff, I use a USB-C dock. It connects to the laptop into one of the USB C ports. One cable, mind you. This dock has the following connected to it: 3 HDDs totaling 14TB of data + my headphones + speakers + external microphone + mouse + external display + projector + 1GB Ethernet + power charging so that it also charges the laptop + webcam.
This is so amazing. It means I can quickly unplug one single cable and take the laptop. Then plug it in and all of those are connected.
The webcam is also better than your average laptop camera, like for example many times better than Slimbook’s. The built-in microphone I’ve heard is also very good but I have not tested it yet. The webcam also has a physical shutter so you can block it.
THE INSIDES! I think this is the only laptop-convertible in the world that’s 16inches and has a 16:10 aspect ratio, is so slim yet all metal build, but allows you to replace the RAM and has 2 slots for it. This was a must for me. It was advertised as 32GB max, but I easily added 64GB of RAM. DDR4. And I upgraded the NVME M2 to 4TB.
To compare it now with the Slimbook Executive 16, that one costs 1.750 Euros with 16GB of RAM and 512GB SSD. Sure, the CPU is a bit better and the GPU much better (useful only if you play video games which I do not). This laptop, the Inspiron 7620 costed me 1.100 Euros and with 64GB of RAM + 4TB SSD around 1.700 Euros. MUCH MUCH MUCH better in all regards than the Slimbook offer.
Lastly the power button it is also a fingerprint reader:
And I managed to make it work in TROMjaro – wasn’t that difficult. How amazing that now I can unlock the computer with the fingerprint and works perfectly fine. Or when I install new packages….FINGERPRINT! NO more typing my very long admin password 😀.
OVERALL.
For 1.700 Euros I got a great laptop. It has a big and amazing screen, great port selection, fantastic build quality, great touchpad, good webcam and mic, ok upgradability and repairability, great CPU and good GPU. Touchscreen, bendable 360 degrees, consumes less energy than the Slimbook, small power charger (USB C), great price overall. In time I’ll get used to the keyboard too and the software related issues will be fixed.
Ok ok, a very long post…..but to me this machine is important since it allows me to do the so many projects I am doing. It is an extension to my brain. So it matters to me.
Now I plan to give my old laptop to a dear TROM friend who has helped the project a lot for the past year or two. If I manage to send it to the other side of the globe somehow to not break our pockets. I want to give my older stuff to others who can use it for longer.
I will try to get “laptops” out of my head and in a week or so to focus again on TROM II. I spent a lot of time searching for a good laptop and I feel like I have finally found it. It is time to move on 😀
UPDATE
I wanted to post an update about the laptop now that I’ve used it for a bit.
I got used with the keyboard. Of course this was meant to happen. I still think is not the greatest keyboard I’ve used but it is ok. You don’t think about it after some time. I also managed to physically switch the Y and Z keys without breaking them 😀 Now everything seems more “natural” in terms of typing.
However the trackpad makes some rattling sounds when I use the laptop in bed. Almost like it is a tiny bit loose. I may try to fix that another time.
Build quality is not as great as I thought.
I opened the laptop today to properly look inside. I have to say it was easier to open than before, as I was expecting, but still not a great experience. The worst is what I discovered…I realized that yes the laptop is a metal built BUT inside where the hardware is, there is a plastic mesh/backbone where everything is held into place…which means the screws are screwed into the plastic, and so are the hinges. Watch this video to see my disappointment:
I was and still am very disappointed. I did not realize that the first time I have opened it. Thing is even if I did, I cannot find a better laptop overall. From the screen size, to the ports, outside chassis, specs….cannot….so it is what it is. But it is deceiving and stupid to make a metal chassis but not have the components screwed into it. Now I will have to be extra careful with this laptop to not break the plastic….my worst nightmare. I have used it today all day while sitting in bed and felt very sturdy and all that. So I hope it will be ok and last me for a long time. And if not I can later on sell it and hopefully Framework can make some 16inch ones so I can grab one of those.
Don’t get me wrong, the laptop feels very well built, but now that I know how it is screwed inside, I will be more careful with it.
It is many times better than my previous laptop so….that’s great.
Software issues?
Almost no more software issues. Everything was fixed with the new 6.1 kernel and with the 6.2 one the 2 speakers out of 4 that do not work now, will also work. So yeah, as I was predicting, in Linux is not a big deal if some hardware does not work ok. It will in the near future especially when we talk about a newly released laptop.
I LOVE the fingerprint reader. Install/remove packages, unlock the computer, are done in a split of a second now. The fingerprint reader works like a charm and I will add a package for it for the next release of TROMjaro and a tutorial about how you can enable it.
The rest?
The screen is wonderful. FullHD or 4k look the same so I use it in FullHD. The laptop is fast, allowing me to compile a new TROMjaro ISO in some 15 minutes compared to 50 minutes before. The mic and camera are good. The speakers very good and I could only test it with 2 out of 4. The battery is ok…nothing special about it.
I made a shitty quality video about it today to show the laptop a bit and the fingerprint reader 🙂 – I am lazy to record it properly but here you go:
I cannot find a better laptop for my needs now. This one is indeed great. Even if the insides are plastic….it is ok (at least I hope so). Having this portable laptop is fantastic and 64GB of RAM + 4TB NVME are heaven for me haha.
I should leave this behind and work on TROM II, to finish it in 2-3 months. 😉
LAST AND SMALL UPDATE:
Today I got another kernel update and all speakers work. 4 speakers. They sound great for a laptop. Very loud, very clear. Very happy about that. Also, am less and less disappointed about that plastic inside. The laptop feels sturdy so I hope all will be ok.
Touchpad issues update
After 2 months of use there are 2 issues with the touchpad. Mind you I rarely use the touchpad so perhaps these are much bigger issues for most people than they are for me. But there is a fix for them.
The noises, the rattles.
From the beginning I noticed that when I use the touchpad it made a sound when I tapped it to click. As if it is not screwed well into place. And after a while it gets annoying and more noisy. Basically the touchpad is a bit lose. To fix this I had to add some paper tape and some sticky foam pads. Here is the video:
As you can see this requires a little bit of effort since you have to test and see what works best for you. The other issue is that if you fix it you may make it too stiff and if you are used to push-to-click instead of tap-to-click it may become annoying. Mine is a bit too stiff but I much rather prefer that. I never push-to-click on the touchpad. Tapping is much easier for me.
The electrons are mad.
One HUGE issue with this trackpad is something I’ve read about before buying it but I did not think it would happen to me. Basically the mouse pointer would jump chaotically on the screen when you used the touchpad, or click, it was a mess. There are many forum posts about it and this is the main reason people return these Dell 7 thousand series back. I finally found this forum thread where people discovered that there is an issue with the grounding and static electricity building up. So basically a hardware issue. Funny enough if you were to create a friction between your palm and the touchpad for a few seconds, it would work again.
The real solution is to create a better connection between two pieces of metal on the touchpad. And so I did:
I hope it will work from now on, if not I’ll try to connect those bits better.
Yeah for such an expensive laptop you expect better. But I am happy that these are the only issues I experienced so far and are quite easy to fix. Overall the battery is very good, the build quality is great, the speakers are ok, the keyboard is fine, the port selection is bloody useful, and the screen is AMAZING. I love it.
It is powerful enough for me for the many years o come, it is portable, and overall I love it.
That’s all I hope.
Touchpad update
The electric tape solution didn’t work at all. In a day or two it went back to how it was. Since then it became worse and worse. The trackpad/touchpad was unusable. I then decided to go for the soldering. I really didn’t want to do that to my laptop but I did it. For details see this forum post. I did a really bad job at soldering because I was tired and the bits I was soldering to on the trackpad were so tiny. I did that some 3-4 days ago and since then the trackpad works like a charm. I still can’t believe it. This really stressed me out and made this laptop unusable as a laptop really, unless you always have a mouse with you.
Anyway, so far it works perfectly fine and I really hope this did it. It is the solution that everyone recommends.
The laptop itself is great. Very well built, amazing screen, very good speakers, powerful and all of that, so I would not know what else to buy if it wasn’t for this one, so I am beyond happy if this issue is finally solved….
As for the rattling I realized that the simplest solution is to put a paper tape between those two little metal things and the laptop’s chassis. So that when they touch they make a lot less noise. So bellow those as you see in the photo, I added one piece of tape. Now all is fine.
So right now the laptop is well and dandy. I love it overall considering the alternatives. I really hope this is the last update.
Hi all,
As many of us are facing issues with the Inspiron 7610 touchpad, I have noticed that Dell has not taken a position on this and refuses to do anything besides forcing you to send in the lapt...
Quick background: I want to buy a laptop that is really well built, easy to upgrade and repair, and portable. Has at least a 16inch screen and a decent battery, plus a good keyboard.
Some 2 weeks ago, after spending many weeks searching for a good laptop, I finally decided to order the extremely expensive Slimbook Executive 16. I was at first more inclined to buy the twin from Tuxedo because it was black and I could buy it without Nvidia, so much cheaper.
BUT.
The Tuxedo people told me that although on their website it says: These laptops are actually made out of plastic and that magnesium alloy is steamed on the chassis themselves. What!? I made sure I got it right so I asked them to confirm several times. And they did. At best their website is dishonest, at worst they want to trick you. Which one is it? You decide.
Now, because TUxedo and Slimbook provide laptops that are honestly almost, if not entirely, identical (just check all of their models – chassis, hardware, sizes, etc.) I asked the Slimbook people if theirs are also plastic with coated magnesium alloy. They confirmed at least 10 times I think, that this is not true. Theirs are purely metal: aluminium+magnesium alloy, as stated on their website.
I decided. Slimbook.
It arrived: Took a while but it arrived. I live in Spain, they ship from Spain, 5 hours away from where I am. Ok. Anyway.
First impressions were that it does not feel like a sturdy laptop. I have 2 to compare it with. First is my plastic laptop. Slimbook feels sturdier than my laptop. Second is Sasha’s laptop which is a 13inch fully aluminium laptop. Slimbook feels like plastic compared to that one. I can beat you with Sasha’s laptop for sure, and I could even kill you with it, then I am quite sure it will probably still work. But I can’t do that with Slimbook. Yes magnesium alloy is lighter than aluminium, but idk…it feels like a well built plastic laptop to me. Which is not a good thing for me since I want a very s sturdy one.
So, the way it is built, for me, is not what I was looking for. I am inclined to believe this is “a plastic laptop with magnesium alloy steamed onto it”, like the Tuxedo folks were saying. Call me crazy but I won’t be shocked if the Slimbook people willingly or not misinformed me about their build quality.
Funny that they have a sticker that says “Protected by Magnesium”. Protected…hm…. I don’t know but if I were to sell laptops that are fully metal built, I would advertise that like “Chassis made out of aluminium and magnesium alloy!”. Again, maybe this is a conspiracy I am creating inside my head but things smell fishy to me.
The keyboard is a bit odd. Some key symbols are not centered yet others are… Not something that bothers me too much, but still an odd thing to see.
The charged is a fat-charger for a slim-book 😀 It is massive. That makes this laptop not very portable since the battery form my initial tests, is not great with that Nvidia card. Maybe lasts for 2-3h…maybe a bit more. Maybe it is normal for such a powerful machine.
The worst part: the screen colors are washed out. Look: I do not care about little differences, but this is a massive difference. My old laptop has a more contrasty look, a lot more. Slimbook is super washed out. I tested on Sasha’s laptop and her screen is almost identical with mine. So idk which screen looks more like most screens out there, but for sure I prefer my old laptop screen and Sasha’s screen. If two screens from two different laptops look a lot better than the Slimbook’s one, maybe it is the Slimbook that’s not doing well.
And this is awful because I checked the documentary I just edited the colors for, and on my screen and Sasha’s looks great, on Slimbook looks not that great….what is it happening? Maybe this model has a fucked-up screen!? IDK…but this is the worst thing for me, something that if not fixed I will return the laptop. I can maybe put up with the rest, but not with this for sure.
Speaking of screens. You know I’ve been saying that 2k 3k 4k screens are a BS marketing unless we talk about very large screens and content to match that screen. Well…Slimbook has a 16inch 3k screen. If I switch between 3k and fullhd I can’t really tell any difference. Maybe my eyes are not the best, but I feel like this is just a BS marketing thing.
Now…the screen size is perfect for me. I love the 16:10 aspect ratio. I love how light it is. I like how it looks and I despise those many stickers. The webcam is decent, the speakers are great. I can’t open it to look inside because they added a sticker to one of the screws to stop you from doing that and I am concerned I can’t return it if I open it up. Speaking of that, the bottom part of the chassis feels like pure plastic to me. Quite flimsy even when it is attached to the laptop.
Overall this laptop is a monster in terms of hardware. That’s fantastic. But the build quality, although not bad at all, is not at all a sturdy one in my view. I would feel concerned to carry this laptop around for long. The battery is not great at all and if you leave it on the bed for example, the laptop gets super hot super fast.
I will test it for longer but so far idk what to say….because on one hand I LOVE the screen size and the overall size and weight of the laptop. But at the gigantic price of 1750 Euros….(sure I got it 150 euros cheaper), but at that price you expect a fantastically well built laptop that will last you for a decade. At least that’s how I think.
Maybe that’s how laptops are built nowadays….light, seem fragile….maybe I will keep it eventually. But idk…if not I will return it and search for a new one next year after TROM II is done. I may be inclined to go for a good Thinkpad or older models that were better built.
Let’s see if Slimbook will convince me to keep it….I kinda doubt….
